How do I program my Merlin mr800a remote?
Press and release the PURPLE “LEARN” button on the opener. The orange indicator light will glow steadily for 30 seconds. Within 30 seconds, press and hold the desired button on the wireless wall control or remote control that you wish to operate your garage door. Release the button when the opener light blinks.
How do you program a Herculift garage remote?
Coding your Remote into the Opener 2. Press any one button on the remote (which ever one you want to control the door) for about 2 seconds, the ‘Learn Led’ will switch off. Release the button and press again for 2 seconds, the ‘Learn Led’ will begin to flash. When the LED stops flashing, the remote code is programmed.
Where is learn button on Merlin 230t?
There is a learn button on the underside of the opener inside the lamp cover. The small button on a Merlin M-122 wired wall-switch can also be used as the learn button. If a setting is enabled in the opener, then it is possible to use any existing learned wireless control as a learn button.