- 1 How do I program a universal remote without a code?
- 2 What is a RM Series Remote?
- 3 How do I program my Sony TV remote?
- 4 How do you pair a universal remote?
- 5 How do I pair my remote to my set top box remote?
- 6 How do I sync my one for all remote to my TV?
- 7 How do I connect my one for all remote to my TV?
- 8 How do I sync my Sony remote to my cable remote?
- 9 Where is the setting button on a Sony TV remote?
How do I program a universal remote without a code?
To program your universal remote without a code you will need to:
- Hold down the SET button and while pressing the number 0 (zero) button of your remote control four times.
- The light of the remote control (usually red) will have been lit steadily.
What is a RM Series Remote?
This RM Series remote control is a replacement which will operate ALL the functions of the original RMC1486 remote. RM Series remote control has been designed and assembled from the original remote control.
How do I program my Sony TV remote?
Sony Universal Remote Codes
- Sony Programming Instructions.
- On the remote control, press and hold the SET button until the SET indicator lights up.
- Press the appropriate component select button for the component being set up.
- Using the number pad, enter the component’s manufacturer code.
- Press the ENTER button.
How do you pair a universal remote?
Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.
How do I pair my remote to my set top box remote?
You can program the TV remote to enjoy the functionality of controlling your TV and Set Top Box(STB) simultaneously. Press and hold the STB button, then press the corresponding code while still holding the STB button. Release the STB button when done. – If successful, the STB button LED will turn RED and blink twice.
How do I sync my one for all remote to my TV?
How to Program your One For All® remote
- PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- ENTER the 3 digit code for your brand.
- You should receive 2 quick flashes after entering your code.
How do I connect my one for all remote to my TV?
Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the LED on the remote will blink twice.
How do I sync my Sony remote to my cable remote?
Setup IR control
- Turn on your TV and make sure that the set-top box is connected and it is on.
- On your TV remote control, press the HOME button.
- Select Settings.
- Under the Watching TV category, select External inputs.
- Select Cable/Satellite box setup.
- Select Cable/Satellite box control setup.
If you press the (Quick Settings) button on the remote control, the Settings menu is displayed. In the menu, select Settings to display a list of settings. You can also make picture and sound adjustments while watching content.